Suggestions

Donation for emergency hospital for coronavirus control

March 2020

To combat the spread of the coronavirus in the Chinese city of Wuhan, several temporary hospitals were built in a very short time. ProMinent China donated two chlorine dioxide systems for water treatment for one of them.

Following the outbreak of the coronavirus in the Wuhan region, the second provisional hospital was already put into operation on 8 February 2020. The Leishenshan Hospital can accommodate 1,500 patients. It consists of 3,300 prefabricated units for the medical isolation area, a lounge area for hospital staff and a logistics area. Even during the construction phase of only two weeks, ProMinent took immediate action:

Two Bello Zon® CDEb systems were delivered immediately. The installation and commissioning on site was carried out by ProMinent China employees themselves and was completed within only three days.

The chlorine dioxide systems are used for the treatment and disinfection of medical waste water and thus make an important contribution to the smooth running of the hospital. ProMinent China had already donated a chlorine dioxide system for an emergency hospital 17 years ago when the SARS virus broke out.

Contact us

ProMinent Fluid Controls Ltd.


»We are always available to help. Don't hesitate to contact us.«

+1 888 709 9933 

News and Events

Matching Products

To combat the spread of the coronavirus in the Chinese city of Wuhan, several temporary hospitals were built in a very short time. ProMinent China donated two chlorine dioxide systems for water treatment for one of them.

more

To combat the spread of the coronavirus in the Chinese city of Wuhan, several temporary hospitals were built in a very short time. ProMinent China donated two chlorine dioxide systems for water treatment for one of them.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The AEGIS II provides reliable control and offers the most flexible communication options to optimize efficiency and profitability for all your cooling, boiler, and wastewater or disinfection applications.

more

Continuous on-line measurement of ammonia using pH appropriate sensor technology. Uses specific sensor adapted to operational pH range to ensure correct measurement. Determine free ammonia, total ammonia, and NH3-N for control and reporting purposes.

more

The BAMa is a bypass armature used to secure all ProMinent potentiometric, amperometric and conductivity sensors for water treatment. It is typically installed within a bypass waterline to monitor variables in water treatement applications. Its modular design allows it to be maintained, cleaned and adjusted without the use of tools.

more

The ProMinent beta is a microprocessor-based diaphragm solenoid metering pump capable of flows from 0.16 to 8.45 gph (0.59 to 32 l/h) and pressures to 363 psi (25 bar).

more

Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via contacts.

more

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

more

Bello Zon CDLb H2SO4 especially for applications critical with regard to corrosion for the production of low-chloride chlorine dioxide liquid. With the chlorine dioxide system, ClO2 is produced discontinuously following the acid / chlorite procedure.

more

Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO2 discontinuously using the acid/chlorite process with diluted chemicals.

more

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

more

The ProMinent CO2 Feeder is designed to utilize Carbon Dioxide (CO2) in the control of pH levels in pools and spas.

more

Its compact construction and features make it ideal for use in flow proportional or on/off control applications.

more

The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

more

The DULCOMETER diaLog X is a programmable controller used in a variety of water treatment applications to control metering pumps, valves, motors and other components to provide full automation of your chemical feed system.

more

The ProMinent DCM 3 Series controller is the perfect partner for remote monitoring and controlling water chemistry and processes in pools, spas, hotels, motels, and condos.

more

The ProMinent DCM 5 Series controller is the perfect partner for remote monitoring and controlling water parameters and processes.

more

PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching sizes.

more

The DulcoBlend I provides a solution for activating and blending emulsion polymers when the pressure piping codes need to be accomodated. The unit is CRN approved for applications in Canada.

more

The DULCOFLEX (DFXa) is an intelligent peristaltic metering pump that is valve-free and has the accuracy of a diaphragm pump. Applications include gaseous, highly viscous, abrasive, shear-sensitive and chemically aggressive fluids.

more

The new DULCOFLEX (DFYa) metering pump, the big brother of the DFXa, adds an intelligent peristaltic pump to the top capacity range of the ProMinent portfolio.

more

The DULCOFLOW flow meter measures all liquid media. The amount of liquid which has passed through in pulsing flow regimes are measured.

more

The DULCOLEVEL is an easy-to-use radar sensor that provides continuous, accurate and reliable measurements of chemical levels within tanks, containers or IBC totes.

more

The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

more

Compact 2-wire-transmitter with microprocessor technology. Reliable monitoring for pH, Redox, Chlorine, conductive conductivity, and temperature applications.

more

Compact 2-wire measurement transmitters without display and operation for measuring pH, Redox, Temperature and Fluoride values. Simply combinable with programmable logic controllers via 2-wire connection.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The next generation of mobile product assistance from ProMinent – DULCONNEX Blue. The smart app enables intelligent pumps to be conveniently controlled by Bluetooth.

more

The DULCONNEX Gateway safely and reliably transfers the data of all products supported as standard to the DULCONNEX Cloud

more

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.

more

DULCONNEX Platform is a web-based IIoT platform for digital fluid management. The web application offers simple and location-independent access to all relevant system and process data and thus increases system availability. By continuously monitoring important parameters, the process quality can be optimized and the safety of employees increased. Comprehensive logging and automated generation of reports facilitate the fulfilment of documentation obligations.

more

ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.

more

pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

more

Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for a very wide range of water qualities.

more

Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

more

Chlorite measurements with DULCOTEST sensors in disinfection processes involving chlorine dioxide – high process reliability guaranteed.

more

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

more

Widely used sensor for the measurement of oxygen dissolved in water above 0.1 ppm to oxygen saturation. For installation in standard immersion pipes or in the bypass line of the process flow. Use in aeration tanks of clarification plants, waterworks, in fish breeding or to monitor surface water. Minimal maintenance due to visual measuring principle.

more

Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

more

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

more

Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

more

Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real time.

more

Measurement of peracetic acid concentration with DULCOTEST sensors: Precise and reliable for disinfection in safety-sensitive applications in the food, pharmaceutical and medical industries. Can also be used in waste water treatment.

more

Disinfection of swimming pool water with the application-optimised DULCOTEST sensors for total available chlorine - exact measured values and high process reliability guaranteed.

more

Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

more

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

more

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

more

CHLORINSITU IIa XL is the tubular cell electrolysis system for on-site production of large quantities of hypochlorite. Users cannot fail to be impressed by its ease of operation and outstanding efficiency combined with optimum process stability for the reliable disinfection of large volumetric flows.

more

Ultra-pure or low-chloride and low-chlorate sodium hypochlorite requires specialist plant engineering. The electrolysis system CHLORINSITU III is the solution for you.

more

Generation of sodium hypochlorite solution for smaller swimming pools and pools.

more

Produce high-purity chlorine gas in a vacuum process. Cost-effective, robust and compact.

more

Electrolysis systems of type CHLORINSITU V Plus generate ultra-pure chlorine gas directly on site and only need salt, water and electricity to do so. Peaks in demand can be covered by this system (Plus system). They are especially well suited to systems for disinfecting potable water, waste water, process water and water in swimming pools and cooling towers.

more

Electrolysis systems of type CHLORINSITU V take the place of the chlorine gas system in the swimming pool and only need salt, water and electricity to do so.

more

Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost efficiency.

more

The ORLITA Evolution meets the most exacting safety requirements as an extremely robust hydraulic diaphragm metering pump. It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling and unique diaphragm position control.

more

The diaphragm metering pump EXTRONIC is perfectly suited to the sensitive application of liquid media in facilities at risk of gas explosions as it is approved in compliance with the EU EX Regulation 2014/34/EU (ATEX).

more

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

more

The HYDRO API 675 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements and is designed in accordance with API 675. This is ensured by the PTFE multi-layer diaphragm with diaphragm monitoring, the full-motion drive and automatic bleeding, for example. Its modular construction makes it extremely versatile.

more

As an extremely robust hydraulic diaphragm metering pump, the HYDRO range meets the most exacting safety requirements. Its modular construction, with either one or two dosing heads, 4 gear ratios, 2 dosing head sizes and 3 dosing head materials, offers a very high degree of flexibility in terms of areas of application.

more

The robust hydraulic diaphragm metering pump Makro/ 5 guarantees outstanding process reliability. Its modular construction offers extremely good flexibility and a large range of drive versions are available.

more

As an extremely robust hydraulic diaphragm metering pump, the ORLITA Evolution E1Sa meets the most exacting safety requirements. It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling system and unique diaphragm position control.

more

The ProMinent ProMus is a motor driven metering pump with a hydraulically actuated Teflon diaphragm. The plunger and diaphragm are hydraulically coupled and are precisely controlled by a mechanically actuated replenishment valve, which senses diaphragm position to admit coupling fluid as needed. The coupling fluid is continuously degassed to maintain accuracy. The drive case is protected from overload by a simple acting relief valve.

more

The metal diaphragm metering pumps ORLITA MHHP are special pumps, which provide precise pump capacities even at maximum pressures of up to 43,512 psi.

more

The ProMinent LogR is a single channel corrosion rate monitor using Linear Polarization Resistance (LPR) to measure the corrosion rate of metals in cooling water treatment applications. Weight loss coupon results can take weeks or months. With the LogR, a reading is taken every 2.5 minutes giving accurate corrosion rates instantly. Select from carbon steel, copper, or admiralty sensors.

more

The ProMinent Makro TZMb is a mechanically or hydraulically actuated motor driven diaphragm metering pump. The stroke length can be adjusted by means of the shift ring mechanism from 0-0.4 in (TZMb), with 0.5 % accuracy. The 5-speed gearbox is encased in a cast, seawater resistant, acrylic resin lacquered housing.

more

The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

more

Monitoring and treatment of cooling water with DULCODOS Cooling Water–the compact measuring and control system specially designed for the treatment of cooling water in evaporation cooling systems and wet separators.

more

The metering and emptying station DULCODOS SAFE-IBC provides your process with chemicals interruption-free. The system conforms to chemical compatibility requirements for a safe and innovative solution for storage and injection.

more

For storing and metering liquid chemicals Use a selection guide (identity code) to quickly and flexibly adapt your metering system to your metering task.

more

The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

more

The proportional metering system Promatik is used in the potable water sector for the flow-dependent, adjustable metering of liquid media, like the EXACTAPHOS®. It consists of the metering pump beta, a contact water meter, a suction assembly with foot valve, level switch and wall bracket, and an injection valve and metering line.

more

Manual polymer batching station ULTROMAT MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.

more

The ProMinent metering system ULTROMAT ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

more

Polymer preparation station ULTROMAT ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.

more

The metering system ULTROMAT ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution.

more

The ProMinent microFLEX is a powerful controller integrating built-in diagnostics with realtime monitoring in a compact design.

more

The ProMinent microFLEX is a cooling tower/closed loop controller that combines the latest technology with an economical solution. Our breakthrough design offers a worry-free thermal flow switch that does not require any user adjustments or calibration.

more

The hygienic design version of the sigma diaphragm metering pumps is optimised in terms of dead space, features as few gaps as possible and has smooth, wetted surfaces for flexible and easy use in hygienically sensitive applications.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

more

The hydraulic diaphragm metering pump ORLITA MF offers reliable dosing rates even under high pressure and has a modular construction, making it highly versatile. Thanks to its modular design, this pump is tailored to meet your requirements even at very high pump capacities.

more

Particularly suitable for very high pressures. Exact adaptation of the pump to particular requirements because of modular design.

more

The ProMinent Orlita PS is a packed plunger piston metering pump.

more

DULCOZON OZLa is an ozone generator with low life cycle costs. It combines a high ozone concentration with unbeatable efficiency.

more

OZONFILT OZMa is synonymous with maximum operational safety and minimal operating costs. The ozone generator is maintenance-free and generates up to 0.93 lb/h (420 g/h) of ozone from compressed air.

more

OZONFILT OZVb is powerful and compact and is ideal for efficient ozone generation from compressed air in the output range of up to 0.15 lb/h. The turnkey ozone system including mixing equipment offers everything you need for safe and seamless operation.

more

The DULCOFLEX RAD pump offers a choice of tubing or reinforced hose in about 1/2 the space needed for conventional hose pumps!

more

High pump capacities are not a problem with the peristaltic pump DULCOFLEX DFC. It is equipped with extra rollers and fabric-reinforced hoses for industrial use.

more

The peristaltic pump DFD is designed for maximum pump capacities and high pressures and is winning customers over with its noiselessness and long service life. It is fitted with shoes and fabric-reinforced hoses – perfect for industrial use.

more

The peristaltic pump DULCOFLEX DFBr is designed for low and medium pump capacities of up to 337 gph at 116 psi.

more

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

more

The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.

more

The plunger metering pump Makro/ 5 can virtually be used throughout the low-pressure range and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.

more

The plunger metering pump Sigma SBKa is an extremely robust plunger metering pump with high-performance plunger and the option to adjust the pump capacity in 0.2% increments. It offers a wide range of power end versions, such as three-phase or 1-phase AC motors, even for Exe and Exde areas with ATEX certification.

more

ProMinent is your sole source provider for complete chemical metering systems.

more

ProMinent is your sole source provider for complete chemical metering systems.

more

Take the guess work out of your cooling tower control and feed needs, with a ProMinent pre-engineered tower package.

more

Complete wall mounted assembly for easy installation and simple measurement of common water treatment parameters

more

The ProMix-SMS brings a new and effective way for rapid mix and dispersion of water treatment chemicals and disinfectants.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Enhance your wastewater management with the ProMix™ Polymer Blending System. Engineered for efficiency, ProMix™ optimizes polymer use, thus reducing chemical costs and process times. Its unique three-chamber design ensures effective activation without damaging the polymer chains, offering you superior performance in settling solids out of liquids. Easy integration, coupled with robust support and customization options, makes ProMix™ the smart choice for your operational needs.Discover the difference with ProMix™ S — Quality solutions for your application.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The ProSIP MF Metering Pump Packages are designed to accommodate main or main/standard motor driven metering pumps. That way, it offers a floor mount solution for pumps like the Sigma Series, our ProMus, Meta and Plasma Pumps.

more

The ProSIP SF & SW Metering Pump Packages are designed to accommodate main or main/standard solenoid driven metering pumps. That way, it offers a floor or wall mount solution for pumps like the gamma/ X, delta, beta and Concept Series Pumps.

more

ProSip-S is tried and tested package designed to accompany smaller solenoid-driven metering pumps for light duty and municipal chemical applications.

more

Reverse osmosis system DULCOSMOSE BW is the standard model for the modern desalination of brackish water. Equipped with the latest generation of "high rejection low-pressure" membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

The reverse osmosis system DULCOSMOSE SW is the standard model for modern desalination of salt water. Equipped with the latest generation of "high rejection low-pressure" membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

Reverse osmosis system DULCOSMOSE TW is the all-purpose model for modern potable water desalination. Maximum permeate output at low operating pressures ensures low investment and operating costs.

more

Introducing flexible programming with ProMinent's SlimFlex 5 Built-in WiFi Hotspot. Enhanced, responsive browser views for smart phones and tablets makes programming fast and easy!

more

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering of environmentally-hazardous substances.

more

OZONFILT Compact OMVb is a complete, ready-to-use system solution for the generation and metering of ozone.

more

This emptying unit is used to accommodate and empty Big Bags weighing up to 2,200 lb (1,000 kg). The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 8-gal powder storage tank is used to transfer the powder into a feed unit.

more

Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue, from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon (PAC).

more

Its unique construction makes the multi-screw feeder ideally suited for metering powders and granulates.

more

Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic cleaning.

more

Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

more

UV system DULCODES LP for drinking water disinfection, comprehensively certified to internationally-recognised DVGW/ÖVGW/SVGW/UVDGM standards. Looking to the future, the systems have already been type-tested in accordance with the latest DIN 19294-1:2020-08 test regulation. Successful certification officially confirms the precise 50-100% control range of the highly efficient VARIO-Flux lamps with dynamic lamp heating.

more

UV system with hygienic design of radiation chamber. For reliable disinfection and constant quality in your production process.

more

The UV system DULCODES LP TL for syrup disinfection declares war on heat-resistant germs. In instances when standard heat pasteurisation isn't up to the job, UV light provides a very quick and efficient form of disinfection without the need for heat.

more

Disinfection of saline sea water or thermal water with corrosion resistant reactor the UV system DULCODES LP-PE. The UV system consists of a reactor and a UV sensor made of highly UV-resistant plastic.

more

The unique UV systems DULCODES LP are synonymous with pioneering water treatment – efficient and free of chemicals.

more

The UV system DULCODES MP eliminates combined chlorine and therefore the odour typically associated with swimming pools. Say goodbye to irritated eyes, nose and skin. Apart from improving the water quality, the low investment costs and high fresh water and energy consumption savings result in short payback times.

more

ProMinent Newsletter - receive latest news, customized for you! subscribe now