Suggestions

Metering system Promatik

For flows of 4 – 25 m3/h

The proportional metering system Promatik is used in the potable water sector for the flow-dependent, adjustable metering of liquid media, like the EXACTAPHOS®. It consists of the metering pump beta, a contact water meter, a suction assembly with foot valve, level switch and wall bracket, and an injection valve and metering line.

Product description

Protects pipework, fittings, and appliances from corrosion and limescale.

In a flow of water, the contact water meter transmits pulses with a fixed pulse interval corresponding to the pulses to the metering pump in line with the flow. Each of these pulses results in a metering stroke of the metering pump, thereby feeding the metering solution. The metering volume per stroke can thus be adjusted continuously between 100 and 50% using the stroke adjustment dial. Because of the very low starting limit and short pulse interval, a constant volume-proportional addition of chemicals can always be maintained from minimum water flow rate to maximum load, thereby guaranteeing the best process result

Your benefits

  • DVGW-tested in conjunction with the EXACTAPHOS® metering solution. DVGW No. NW-9101 CM 0179.
  • The EXACTAPHOS® metering solutions are matched to the capacity of the Promatik metering systems.
  • Fitting position of the water meter – horizontal and vertical.

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

Potable water treatment

    Technical Details

    • Consisting of a beta metering pump, contact water meter, suction assembly with foot valve and 2-phase level switch with pre-warning as dry-running protection and empty signal, injection valve and dosing line.
    • In the "R" design compact metering system, the metering pump is built onto the contact water meter.
    • In the "W" design split system there are wall brackets for accommodating the metering pump. Contact cable and PE dosing line 2 m long. Horizontal fitting position of the contact water meter.

    Promatik type

    S 4

    S 10

    S 16

    S 25

    Maximum flow Q max.

    gph | m3/h

    1,057 | 4

    2,642 | 10

    4,227 | 16

    6,605 | 25

    Lower operating limit (horizontal)

    gph | m3/h

    7 | 0.025

    17 | 0.063

    26 | 0.1

    42 | 0.16

    Metering interval approx.

    gal/stroke | l/stroke

    0.18 | 0.7

    0.29 | 1.1

    0.48 | 1.8

    0.74 | 2.8

    Metering rate 50 – 100 %

    ml/m3

    50 – 165

    50 – 165

    50 – 165

    50 – 165

    Operating pressure

    psi

    15 – 145

    15 – 145

    15 – 145

    15 – 145

    Metering pump type

    BT4b 1000

    BT4b 1601

    BT4b 1602

    BT4b 1604

    Meter connecting thread

    G 1 B

    G 1 1/4 B

    G 2 B

    G 2 1/2 B

    Connector width

    R 3/4

    R 1

    R 1 1/2

    R 2

    Length without thread

    inch

    7.48

    10.24

    11.81

    10.63

    Shipping weight

    Order no.

    lb | kg

    S 4 split system

    13.2 | 6

    1078282

    S 10 split system

    15.4 | 7

    1078283

    S 16 split system

    19.8 | 9

    1078284

    S 25 split system

    24.2 | 11

    1078285

    Materials

    • Dosing head/valves: Polypropylene (PP)
    • Metering diaphragm EPDM with PTFE insert
    • Seals: EPDM
    • Valve balls: ceramic
    • Float switches: PP
    • Suction assembly: flexible PVC
    • Discharge tube: PE

    Downloads for Metering system Promatik

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Protects pipework, fittings, and appliances from corrosion and limescale.

    In a flow of water, the contact water meter transmits pulses with a fixed pulse interval corresponding to the pulses to the metering pump in line with the flow. Each of these pulses results in a metering stroke of the metering pump, thereby feeding the metering solution. The metering volume per stroke can thus be adjusted continuously between 100 and 50% using the stroke adjustment dial. Because of the very low starting limit and short pulse interval, a constant volume-proportional addition of chemicals can always be maintained from minimum water flow rate to maximum load, thereby guaranteeing the best process result

    Your benefits

    • DVGW-tested in conjunction with the EXACTAPHOS® metering solution. DVGW No. NW-9101 CM 0179.
    • The EXACTAPHOS® metering solutions are matched to the capacity of the Promatik metering systems.
    • Fitting position of the water meter – horizontal and vertical.

    Application

    Technical Data

    Downloads

    Contact us

    ProMinent Fluid Controls Ltd.


    »We are always available to help. Don't hesitate to contact us.«

    +1 888 709 9933 

    Matching Products

    ProMinent Newsletter - receive latest news, customized for you! subscribe now