Bypass Sensor Armature BAMa
Up to 9 function modules can be freely configured in one fitting. Can be used with minimal water consumption of only 5 l/h with temperatures up to 70 °C and pressures up to 7 bar.
Versatile configurable bypass fitting for the installation of the most diverse water treatment sensors with designs optimised for adaptation to very different applications. Uniquely simple manual operation and ultra-easy access and ease of cleaning of all fitting components. A wide range of options for sample water treatment and versatile incorporation into the process.
Modular bypass fitting BAMa: flexible process connection of all ProMinent sensors for water treatment
The bypass fitting BAMa is used for the simple installation of online sensors that are used to determine the substances contained in water in water treatment (such as chlorine, pH, conductivity). The BAMa enables quick calibration When a metering pump has been installed, the capacity in litres per hour has to be determined under ... more in the glossary and maintenance of these sensors.
The modular BAMa is installed in the bypass of the main process line.
The water to be measured reaches the BAMa through the bypass line and flows through the various sensor modules. The measuring water can be discharged from the sensor modules into the wastewateror, if the regulations as well as the specifications of the BAMA and the installed components allow it, be fed back into the process.
- Saving of water consumption to 5 l/h in the special version for e.g. drinking water and other applications with the need to minimize operating costs
- Max. Operating pressure up to 7 bar (at 20 °C) and maximum operating temperature up to 70 °C (at 3 bar), each in the version for higher temperature and pressure applications
- Particle mobility up to 1 mm diameter
- Self-cleaning sensor and removal of gas bubbles due to the optimised flow geometry
- Bayonet fittings for the fast and easy assembly / dismantling of sensors
- Quick and easy removal. Replacement of modules without tools and all parts requiring maintenance are very easy to clean
Field of application
Water treatment: e.g. Drinking water, pure water, pool & wellness, industrial process water, cooling water, process water, rinsing water, wastewater, sea water, irrigation water.
The BAMa bypass fitting includes ball valves, acting as a shut-off at the inlet side and for the manual adjustment of the flow at the outlet side. Besides its sensor modules, the BAMa also includes a sensor module for flow monitoring: with a float flow meter for clean water, a thermal flow sensor for water containing solids, and a sample valve.
A particle filter, as well as a flow limiter, an earthing and potential equalisation set, as well as a metering module for the metering of chemicals for sample water treatment can optionally be fitted.
|Application||Drinking water or similar with sample water drained||Water from Pool & Wellness or similar with sample water returned to process||Industrial water or similar with a solids content and higher temperature and pressure requirements|
|Flow through the BAMa fiiting||5…25 l/h||20…60 l/h||20…100 l/h|
|Minimum priming pressure without flow limiter and with clean filter, for a total of 9 modules||0.025 bar||0.05 bar||0.5 bar|
|Minimum priming pressure with flow limiter and with clean filter, for a total of 9 modules||1.5 bar||1.5 bar||2.0 bar|
|Maximum operating pressure||7.0 bar at 20 °C||7.0 bar at 20 °C||7.0 bar at 20 °C|
|Maximum operating temperature||60 °C at 3.5 bar||60 °C at 3.5 bar||70 °C at 3.0 bar|
|Particle mobility |
(proved with non-agglomerating, non-sedimentary model particles)
|< 300 µm||< 300 µm||< 1,000 µm|
Downloads for Bypass Sensor Armature BAMa
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.