Suggestions

DULCOTEST temperature sensors

Measuring ranges 32 … 212 °F (0 … 100 °C)

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

Product description

Temperature measurement with the reliable DULCOTEST sensors

Temperature measurement can take place separately or as a correction variable for other measured parameters.

Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

  • pH
  • Fluoride
  • Conductivity
  • Chlorine dioxide
  • Hydrogen peroxide

Your benefits

  • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
  • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
  • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
  • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

Field of application

The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.

  • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    DULCOTEST Temperature Sensors

    Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

    Your Benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Technical Details

    • Type Pt 100: for wide range measurements and with the controllers D1C, DAC and DULCOMARIN 3
    • Type Pt 1000: for high resolution with transmitter DMT and controllers DAC and DULCOMARIN 3

    Field of Application

    • Temperature measurement is universally used either to directly measure the temperature or for temperature compensation.

    Temperature

    32…212 °F (0…100 °C)

    Max. pressure

    145 psi

    Thread

    PG 13.5

    Electrical Connection

    SN6

    Typical applications

    Temperature measurement and pH temperature correction.

    Order no.

    Pt 100-SE temperature sensor

    305063

    Pt 1000-SE temperature sensor

    1002856

    Downloads for DULCOTEST temperature sensors

    More in the Download Centre

    0 Results
    Filter by document type
    Application Example / Reference (0)
    Brochure / Flyer (0)
    Catalogue (0)
    Certificate / Declaration (0)
    Data Sheet (0)
    Drawing / Dimensional Drawing / 3D (0)
    Exploded View / Spare Parts (0)
    Material Safety Data Sheet (0)
    Operating Instructions (0)
    Others (0)
    Press Release (0)
    Publication / Article (0)
    Software (0)
    Wiring Diagram (0)

    Selected filters:

    Matching downloads

    Sort by Document type
    Load more matches ...
    No more matches available!

    Unfortunately, we did not find an appropriate match.

    All words written correctly?
    Search again with fewer or different search terms?

    Please try again later

    Service Unavailable

    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

    Overview

    Temperature measurement with the reliable DULCOTEST sensors

    Temperature measurement can take place separately or as a correction variable for other measured parameters.

    Temperature measurement is used universally, either to directly measure the temperature or for temperature compensation when measuring the following parameters:

    • pH
    • Fluoride
    • Conductivity
    • Chlorine dioxide
    • Hydrogen peroxide

    Your benefits

    • Select Pt 100 or Pt 1000, depending on measuring range and accuracy required.
    • Sturdy design with dimensions of a standard pH sensor; the sensor element is integrated in a chemically inert glass sleeve.
    • Easily installed in a similar way to standard pH sensors with a PG 13.5 thread in existing fittings.
    • Transmitter with display/operation and without display/operation for transmission/conversion of the primary signal into a 4-20 mA signal and for transmission to a central control unit (PLC).

    Application

    Technical Data

    Downloads

    Contact us

    ProMinent Fluid Controls Ltd.


    »We are always available to help. Don't hesitate to contact us.«

    +1 888 709 9933 

    Matching Products

    Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.

    more

    pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.

    more

    Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and waste water, suitable for pH values up to 9.5.

    more

    Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

    more

    The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

    more

    The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

    more

    The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

    more

    Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

    more

    ProMinent Newsletter - receive latest news, customized for you! subscribe now