Field of application
The following list is a general representation of basically suitable applications for this product. Please contact your personal representative to discuss the use of the product in your individual application.
- Drag Reducers
- High Viscosity Solutions
Technical Details
- DR 15 - stroke length: 0-15 mm, Rod force: 1,800 N
- DR 150 - stroke length: 0-32 mm, Rod force: 15,000 N
- Stroke length adjustment range: 0 – 100% in operation and idle
- Stroke length adjustment: manually by means of a manual adjustment wheel and scaled display (optionally with electric actuator or control drive)
- Metering reproducibility is better than ± 0.5% within the stroke length adjustment range of 10 to 100% under defined conditions and with proper installation
- Wetted materials: Stainless steel, special designs are available on request
- A wide range of drive versions is available: Three-phase AC standard motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection: IP 55
- Temperature range - 40 °C to + 400 °C
- The play between the piston and cylinder responsible for the sealing effect is selected depending on the viscosity
- Turret on the rear head end, either designed as a circular collecting vessel for leaks or exposed to a sealing medium
- The turret is sealed by elastomer lip sealing rings
Technical data for ORLITA DR 15 single-head pump 50 Hz
Plunger Ø | Theor. stroke volume | Max. capacity (theo.) in gph | l/h at strokes/min (50 Hz) | Max. pressure | Standard type of valve |
---|
| | 58 | 77 | 116 | | |
---|
inch | ml/stroke | gph | l/h | gph | l/h | gph | l/h | psi | |
---|
0.28 | 0.58 | 0.53 | 2.0 | 0.71 | 2.7 | 1.06 | 4.0 | 5,802 | 3/16" |
0.47 | 1.70 | 1.56 | 5.9 | 2.09 | 7.9 | 3.12 | 11.8 | 5,802 | 3/16" |
0.71 | 3.82 | 3.51 | 13.3 | 4.68 | 17.7 | 7.03 | 26.6 | 3,626 | 1/2" |
0.98 | 7.36 | 6.76 | 25.6 | 9.01 | 34.1 | 13.53 | 51.2 | 2,132 | 1" |
1.42 | 15.27 | 14.03 | 53.1 | 18.71 | 70.8 | 28.08 | 106.3 | 1,102 | 1 1/4" |
Technical data for ORLITA DR 150 single-head pump 50 Hz
Plunger Ø | Theor. stroke volume | Theoretical pump capacity in l/h at strokes/min | Max. pressure | Standard type of valve |
---|
| | 70 | 94 | 141 | | |
---|
inch | ml/stroke | gph | l/h | gph | l/h | gph | l/h | psi | |
---|
0.47 | 3.62 | 4.02 | 15.2 | 5.36 | 20.3 | 8.03 | 30.4 | 5,802 | 3/16" |
0.71 | 8.14 | 9.04 | 34.2 | 12.05 | 45.6 | 18.07 | 68.4 | 5,802 | 3/16" |
0.98 | 15.71 | 17.44 | 66.0 | 23.22 | 87.9 | 34.85 | 131.9 | 3,626 | 1/2" |
1.42 | 32.57 | 36.14 | 136.8 | 48.16 | 182.3 | 72.29 | 273.6 | 2,132 | 1" |
Note
All performance data applies to 50 Hz. If a 60 Hz motor is used, the performance will be correspondingly higher.
Abridged presentation of our complete product range. Other types on request.
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.