Product description
Valve Balls
Material | Description | Order no. |
---|---|---|
PTFE | for use with 4.8 mm valve | 7404205 |
316 stainless steel | for use with 4.8 mm valve | 404233 |
Ceramic | for use with 4.8 mm valve | 7500289 |
PTFE | for use with 9.5 mm valve only | 7404206 |
316 stainless steel | for use with 9.5 mm valve only | 404240 |
Ceramic | for use with 9.2 mm (standard) valve | 7500290 |
Special Valve Balls
For metering pumps and accessories if standard materials are unsuitable.
Material | Description | Order no. |
---|---|---|
PTFE | 11.1 mm dia. for DN 10 (Sigma X) | 7404207 |
Ceramic | 11.1 mm dia. for DN 10 (Sigma X) | 7500291 |
316 stainless steel | 11.1 mm dia. for DN 10 (Sigma X) | 7404241 |
PTFE | 16 mm dia. for DN 15 (Sigma X) | 7404208 |
Ceramic | 16 mm dia. for DN 15 (Sigma X) | 404275 |
316 stainless steel | 16 mm dia. for DN 15 (Sigma X) | 404244 |
PTFE | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 404256 |
Ceramic | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 7500292 |
316 stainless steel | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 404246 |
PTFE | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 7404257 |
Ceramic | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 404274 |
316 stainless steel | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 404247 |
PTFE | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 404261 |
Ceramic | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 404278 |
316 stainless steel | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 7404260 |
Valve Springs
You may spring-load the valve balls in the pump suction and/or discharge valves to improve the valve function and increase the repeatability. Particularly recommended when pumping viscous fluids of more than 50 cPs (mPa).
Discharge valve springs may be used instead of an external backpressure valve to improve repeatability when discharging to an open tank. Suction valve springs in excess of 1 psig (0.05 bar) make priming difficult; and in excess of 7 psig (0.5 bar) makes pumping impossible, except where suction pressure exceeds spring pressure.
Not recommended for antisiphon protection – use a diaphragm-type backpressure valve for antisiphon protection.There is no labor charge for installing the valve springs into the pump valves or injection valves.
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1000, 1601, 1602, 1005, 1605
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for valve 4.7 | 469406 |
1.4568 | 14 | for R 1/4" connector - Ø 6 mm | 469401 |
Suction and Discharge Valves, and Injection Valves Model #'s:
beta b & gamma/ X 0708, 0413, 0220, 1008, 0713, 0420, 0232
All standard gamma/ XL liquid ends
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for valve 9.2 | 469403 |
Hast. C | 7 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469404 |
Hast. C/FEP | 7 | for R 1/2" connector – Ø 6, 8 and 12 mm | 818590 |
Hast. C | 14 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469413 |
Hast. C/FEP | 14 | for R 1/2" connector – Ø 6, 8 and 12 mm | 818536 |
Hast. C | 29 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469410 |
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1002 PP4/PP5, 0423, 0230,
plus Injection Valves: Models 0423, 0230
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 10 | 469114 |
Hast. C | 7 | for DN 10 | 469115 |
Hast. C/FEP | 7 | for DN 10 | 818515 |
Hast. C | 14 | for DN 10 | 469119 |
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1006, 1310, 0813 PP4/PP5 only,
plus Injection Valves: Models 1006, 1310 and 0813 PP4/PP5
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 15 | 469107 |
Hast. C | 7 | for DN 15 | 469108 |
Hast. C/FEP | 7 | for DN 15 | 818516 |
Hast. C | 14 | for DN 15 | 469116 |
Discharge Valves Model #'s (w/ auto-degassing):
beta b & gamma/ X 1601,1602, 1005, 1605
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 21 | for DN 15 | 791052 |
DN 10 valves: Sigma/ 1, Hydro
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 10 | 469114 |
Hast. C | 7 | for DN 10 | 469115 |
Hast. C/FEP | 7 | for DN 10 | 818515 |
Hast. C | 14 | for DN 10 | 469119 |
DN 15 Valves: Sigma/ 1, Sigma/ 2 12050, 12090, 12130
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 15 | 469107 |
Hast. C | 7 | for DN 15 | 469108 |
Hast. C/FEP | 7 | for DN 15 | 818516 |
Hast. C | 14 | for DN 15 | 469116 |
DN 20 Valves: MAKRO models with 3/4" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 20 | 469451 |
Hast. C | 7 | for DN 20 | 469409 |
Hast. C/PVDF | 7 | for DN 20 | 818517 |
Hast. C | 14 | for DN 20 | 469135 |
DN 25 Valves: MAKRO models with 1" connectors
Sigma/ 2 models 07120, 07220, 04350
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 25 | 469452 |
Hast. C | 7 | for DN 25 | 469414 |
Hast. C/PVDF | 7 | for DN 25 | 818518 |
Hast. C | 14 | for DN 25 | 469136 |
DN 40 Valves: MAKRO models with 1-1/2" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 7 | for DN 40 | 469104 |
MAKRO HK pumps with 1/4" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for connector R 1/4” Meta/Makro TZ HK | 469461 |
MAKRO HK pumps with 3/8" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for R 3/8” connector Makro TZ HK | 469462 |
Downloads for Valve Balls and Valve Springs
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Overview
Technical Data
Valve Balls
Material | Description | Order no. |
---|---|---|
PTFE | for use with 4.8 mm valve | 7404205 |
316 stainless steel | for use with 4.8 mm valve | 404233 |
Ceramic | for use with 4.8 mm valve | 7500289 |
PTFE | for use with 9.5 mm valve only | 7404206 |
316 stainless steel | for use with 9.5 mm valve only | 404240 |
Ceramic | for use with 9.2 mm (standard) valve | 7500290 |
Special Valve Balls
For metering pumps and accessories if standard materials are unsuitable.
Material | Description | Order no. |
---|---|---|
PTFE | 11.1 mm dia. for DN 10 (Sigma X) | 7404207 |
Ceramic | 11.1 mm dia. for DN 10 (Sigma X) | 7500291 |
316 stainless steel | 11.1 mm dia. for DN 10 (Sigma X) | 7404241 |
PTFE | 16 mm dia. for DN 15 (Sigma X) | 7404208 |
Ceramic | 16 mm dia. for DN 15 (Sigma X) | 404275 |
316 stainless steel | 16 mm dia. for DN 15 (Sigma X) | 404244 |
PTFE | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 404256 |
Ceramic | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 7500292 |
316 stainless steel | 20 mm dia. for valve dia. 3/4" DN 20 (Makro) | 404246 |
PTFE | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 7404257 |
Ceramic | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 404274 |
316 stainless steel | 25 mm dia. for valve dia. 1" DN 25 (Sigma X, Makro) | 404247 |
PTFE | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 404261 |
Ceramic | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 404278 |
316 stainless steel | 38.1 mm dia. for valve dia. 1-1/2” DN 40 (Makro) | 7404260 |
Valve Springs
You may spring-load the valve balls in the pump suction and/or discharge valves to improve the valve function and increase the repeatability. Particularly recommended when pumping viscous fluids of more than 50 cPs (mPa).
Discharge valve springs may be used instead of an external backpressure valve to improve repeatability when discharging to an open tank. Suction valve springs in excess of 1 psig (0.05 bar) make priming difficult; and in excess of 7 psig (0.5 bar) makes pumping impossible, except where suction pressure exceeds spring pressure.
Not recommended for antisiphon protection – use a diaphragm-type backpressure valve for antisiphon protection.There is no labor charge for installing the valve springs into the pump valves or injection valves.
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1000, 1601, 1602, 1005, 1605
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for valve 4.7 | 469406 |
1.4568 | 14 | for R 1/4" connector - Ø 6 mm | 469401 |
Suction and Discharge Valves, and Injection Valves Model #'s:
beta b & gamma/ X 0708, 0413, 0220, 1008, 0713, 0420, 0232
All standard gamma/ XL liquid ends
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for valve 9.2 | 469403 |
Hast. C | 7 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469404 |
Hast. C/FEP | 7 | for R 1/2" connector – Ø 6, 8 and 12 mm | 818590 |
Hast. C | 14 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469413 |
Hast. C/FEP | 14 | for R 1/2" connector – Ø 6, 8 and 12 mm | 818536 |
Hast. C | 29 | for R 1/2" connector - Ø 6, 8 and 12 mm | 469410 |
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1002 PP4/PP5, 0423, 0230,
plus Injection Valves: Models 0423, 0230
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 10 | 469114 |
Hast. C | 7 | for DN 10 | 469115 |
Hast. C/FEP | 7 | for DN 10 | 818515 |
Hast. C | 14 | for DN 10 | 469119 |
Suction and Discharge Valves Model #'s:
beta b & gamma/ X 1006, 1310, 0813 PP4/PP5 only,
plus Injection Valves: Models 1006, 1310 and 0813 PP4/PP5
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 15 | 469107 |
Hast. C | 7 | for DN 15 | 469108 |
Hast. C/FEP | 7 | for DN 15 | 818516 |
Hast. C | 14 | for DN 15 | 469116 |
Discharge Valves Model #'s (w/ auto-degassing):
beta b & gamma/ X 1601,1602, 1005, 1605
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 21 | for DN 15 | 791052 |
DN 10 valves: Sigma/ 1, Hydro
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 10 | 469114 |
Hast. C | 7 | for DN 10 | 469115 |
Hast. C/FEP | 7 | for DN 10 | 818515 |
Hast. C | 14 | for DN 10 | 469119 |
DN 15 Valves: Sigma/ 1, Sigma/ 2 12050, 12090, 12130
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 15 | 469107 |
Hast. C | 7 | for DN 15 | 469108 |
Hast. C/FEP | 7 | for DN 15 | 818516 |
Hast. C | 14 | for DN 15 | 469116 |
DN 20 Valves: MAKRO models with 3/4" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 20 | 469451 |
Hast. C | 7 | for DN 20 | 469409 |
Hast. C/PVDF | 7 | for DN 20 | 818517 |
Hast. C | 14 | for DN 20 | 469135 |
DN 25 Valves: MAKRO models with 1" connectors
Sigma/ 2 models 07120, 07220, 04350
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 1 | for valve DN 25 | 469452 |
Hast. C | 7 | for DN 25 | 469414 |
Hast. C/PVDF | 7 | for DN 25 | 818518 |
Hast. C | 14 | for DN 25 | 469136 |
DN 40 Valves: MAKRO models with 1-1/2" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
Hast. C | 7 | for DN 40 | 469104 |
MAKRO HK pumps with 1/4" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for connector R 1/4” Meta/Makro TZ HK | 469461 |
MAKRO HK pumps with 3/8" connectors
Material | Priming pressure | Description | Order no. |
---|---|---|---|
psi | |||
1.4571 | 1 | for R 3/8” connector Makro TZ HK | 469462 |
Downloads
Downloads for Valve Balls and Valve Springs
Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Contact us
»We are always available to help. Don't hesitate to contact us.«