Cooling Water Treatment in Energy Generation

Suggestions

Products

Requirements - Cooling Water Treatment in Energy Generation

Overview
Downloads

ProMinent uses alternative biocides, and there is a good reason for this: They not only prevent (microbiological) deposits and the formation of legionella in the cooling circuit, but also generate totally safe, if any, by-products from the reaction. The cooling water is therefore always ideally conditioned and disinfected - with no harm to the environment. Instead of traditional biocides with limited effectiveness, our alternative active substances, such as chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary and ozone Significantly less environmentally harmful by-products result from the generation and use of ozone ... more in the glossary, are well metered and used in small volumes for impressive results.

Downloads for Cooling Water Treatment in Energy Generation

Selected filters:

Matching downloads

Sort by Document type

A bis Z

Load more matches ...

No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

Downloads

Suitable products - Cooling Water Treatment in Energy Generation

Measuring and control device DULCOMETER Compact

The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

AEGIS II Controller

The AEGIS II provides reliable control and offers the most flexible communication options to optimize efficiency and profitability for all your cooling, boiler, and wastewater or disinfection applications.

SlimFlex 5 Controller

The SlimFLEX 5a cooling tower controller continuously measures and regulates electrical conductivity and controls the dosing of biocides. This keeps the pipework clean and prevents legionella infestation.

DULCOTEST sensors for conductivity

Graduated measuring ranges 0.01 µS/cm – 2,000 mS/cm

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

Chlorine Dioxide System Bello Zon CDVd

2.5 – 2,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 50 - 10,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd can be easily and safely integrated into any water treatment process.

Chlorine Dioxide System Bello Zon CDKd

7.5 – 12,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO₂, depending on the size of the system: 60,000 m³/h

Chlorine dioxide system for the metering of chlorine dioxide with concentrated starting chemicals. The proven safety concept protects people and the environment. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDKd can be easily and safely integrated into any water treatment process.

Controller DULCOMETER diaLog DACb

The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

NEW

Controller DULCOMETER diaLog X

The DULCOMETER diaLog X multi-parameter controller ensures that complex water treatment systems are operated as efficiently as possible. The controller is highly flexible and suitable for many sensor parameters.

DULCOFLEX - DFXa

0.038 gpd (6 ml/h) to 17.7 gph (65 l/h) at up to 102 psi back pressure

The DULCOFLEX (DFXa) is an intelligent peristaltic metering pump that is valve-free and has the accuracy of a diaphragm pump. Applications include gaseous, highly viscous, abrasive, shear-sensitive and chemically aggressive fluids.

DULCONNEX API

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

NEW

DULCONNEX Inventory Management

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.