Suggestions

Waste Water Treatment in the Paper and Pulp Industry

Clean waste water is returned to nature

Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.

Requirements - Waste Water Treatment in the Paper and Pulp Industry

 

Water treatment solutions from ProMinent ensure that only clean water is returned to nature. To do this we thoroughly clean waste water in an environmentally-sound process – using accurately metered additives and cleverly designed processes. After all, waste water treatment is a complex matter and we know what matters. Depending on the nature of the waste water, certain values must be checked and, if required, regulated (flocculation, disinfection, phosphoric acid, pH etc.).

Let's look at pH: pH sensors transmit the measured values to a controller. If the value varies from a specified level, a metering pump adds acid or lye to restore the pH to neutral. Years of experience have given ProMinent the know-how to efficiently design the individual steps and seamlessly combine them. Our product range: pump series gamma/ XL and Sigma with dosing head The dosing head is where the actual dosing process takes place. more in the glossary material, PP/PVDF, metering systems Ultromat®, conductivity measurement/control using controller DULCOMETER® D1Cb/D1Cc for LF plus sensor.

Downloads for Waste Water Treatment in the Paper and Pulp Industry

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Water treatment solutions from ProMinent ensure that only clean water is returned to nature. To do this we thoroughly clean waste water in an environmentally-sound process – using accurately metered additives and cleverly designed processes. After all, waste water treatment is a complex matter and we know what matters. Depending on the nature of the waste water, certain values must be checked and, if required, regulated (flocculation, disinfection, phosphoric acid, pH etc.).

Let's look at pH: pH sensors transmit the measured values to a controller. If the value varies from a specified level, a metering pump adds acid or lye to restore the pH to neutral. Years of experience have given ProMinent the know-how to efficiently design the individual steps and seamlessly combine them. Our product range: pump series gamma/ XL and Sigma with dosing head The dosing head is where the actual dosing process takes place. more in the glossary material, PP/PVDF, metering systems Ultromat®, conductivity measurement/control using controller DULCOMETER® D1Cb/D1Cc for LF plus sensor.

Downloads

Suitable products - Waste Water Treatment in the Paper and Pulp Industry

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

The entire Sigma motor-driven metering pump product range, control type S1Cb/S2Cb/S3Cb, has been equipped with intelligent features, like removable operating unit and an automatic overpressure cut-off.

more

Our plastic storage tanks guarantee compliance with statutory specifications taking into account country-specific approvals, which regulate the production and operation of systems for storage and metering of environmentally-hazardous substances.

more

The metering and emptying station DULCODOS SAFE-IBC provides your process with chemicals interruption-free. The system conforms to chemical compatibility requirements for a safe and innovative solution for storage and injection.

more

The metering system ULTROMAT ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer solution.

more

The ProMinent metering system ULTROMAT ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.

more

The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.

more

The DULCOMETER Type D1Cb is suitable for applications in drinking water, wastewater, and cooling water treatment. The single channel measuring and control unit D1Cb is equipped for all-important measured variables for basic applications in water treatment and with an error and calibration logbook.

more

The measuring and control device DULCOMETER Compact for pH and redox measured variables is equipped with the standard functions for use in water treatment plants, allowing the operator to switch between the measured variables pH and redox, and between P and PID control characteristics.

more

Compact 2-wire-transmitter with microprocessor technology. Reliable monitoring for pH, Redox, Chlorine, conductive conductivity, and temperature applications.

more

This emptying unit is used to accommodate and empty Big Bags weighing up to 2,200 lb (1,000 kg). The Big Bags are suspended in the frame with the aid of a lifting cross bar. The 8-gal powder storage tank is used to transfer the powder into a feed unit.

more

Its unique construction makes the multi-screw feeder ideally suited for metering powders and granulates.

more

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

more

Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The DULCOMETER DACb controller uses intelligent controller functions to close the control circuit between ProMinent DULCOTEST sensors and ProMinent metering pumps.

more

The DULCOMETER diaLog X is a programmable controller used in a variety of water treatment applications to control metering pumps, valves, motors and other components to provide full automation of your chemical feed system.

more

The DULCOFLEX (DFXa) is an intelligent peristaltic metering pump that is valve-free and has the accuracy of a diaphragm pump. Applications include gaseous, highly viscous, abrasive, shear-sensitive and chemically aggressive fluids.

more

With DULCONNEX API, you can access your data on request from the DULCONNEX Cloud. Use this for integration into existing process control systems, SCADA, mobile or online apps as well as MES or share data with other digital solutions.

more

The DULCONNEX Inventory Management add-on is an extension to the DULCONNEX Platform. It can be used to monitor tank levels and inventory levels of chemicals at various sites regardless of your location. Tank level monitoring is based on the data of the DULCOLEVEL radar level sensor.

more

Complete wall mounted assembly for easy installation and simple measurement of common water treatment parameters

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Enhance your wastewater management with the ProMix™ Polymer Blending System. Engineered for efficiency, ProMix™ optimizes polymer use, thus reducing chemical costs and process times. Its unique three-chamber design ensures effective activation without damaging the polymer chains, offering you superior performance in settling solids out of liquids. Easy integration, coupled with robust support and customization options, makes ProMix™ the smart choice for your operational needs.Discover the difference with ProMix™ S — Quality solutions for your application.

more

The ProMinent ProMix™ is a pre-engineered polymer mixing system made for the water and wastewater markets. Designed as an in-line unit, the ProMix™ can be customized to meet most liquid polymer applications utilizing tubing or diaphragm pump technologies depending on the application requirement or customer preference. The unique mixing chamber allows for complete makedown of the neat or diluted polymer to guarantee a problem-free injection.

more

Contact us

ProMinent Fluid Controls Ltd.


»We are always available to help. Don't hesitate to contact us.«

+1 888 709 9933 

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now