Suggestions

Potable Water Treatment

Outstanding water quality in line with global WHO standards

ProMinent turns water into hygienically perfect potable water – with powerful systems and components, which can be ready mounted for operation or individually configured.

Requirements - Potable Water Treatment

 

Water is in short supply so experts are needed when producing it for human consumption. ProMinent has products to cover almost every process used to treat and disinfect potable water and matches these to the prevailing requirements. Of course, we also ensure compliance with local statutory requirements. Oxidation, membrane filtration In water treatment, membrane filtration is the process for removing particles and salts in the water ... more in the glossary and desalination make the water palatable. Our wide range of disinfection solutions (chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary, chlorine, gravity filtration, nanofiltration Nanofiltration is based on the same principle as reverse osmosis Reverse osmosis is a sub-sector within membrane filtration. It is the process with the highest ... more in the glossary. The difference: The separation ... more in the glossary, desalination, silver-ion sterilisation, ultraviolet disinfection and ozonisation) also guarantee absolute disinfection safety.

Downloads for Potable Water Treatment

More in the Download Centre

0 Results
Filter by document type
Application Example / Reference (0)
Brochure / Flyer (0)
Catalogue (0)
Certificate / Declaration (0)
Data Sheet (0)
Drawing / Dimensional Drawing / 3D (0)
Exploded View / Spare Parts (0)
Material Safety Data Sheet (0)
Operating Instructions (0)
Others (0)
Press Release (0)
Publication / Article (0)
Software (0)
Wiring Diagram (0)

Selected filters:

Matching downloads

Sort by Document type
Load more matches ...
No more matches available!

Unfortunately, we did not find an appropriate match.

All words written correctly?
Search again with fewer or different search terms?

Please try again later

Service Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Overview

 

Water is in short supply so experts are needed when producing it for human consumption. ProMinent has products to cover almost every process used to treat and disinfect potable water and matches these to the prevailing requirements. Of course, we also ensure compliance with local statutory requirements. Oxidation, membrane filtration In water treatment, membrane filtration is the process for removing particles and salts in the water ... more in the glossary and desalination make the water palatable. Our wide range of disinfection solutions (chlorine dioxide Chlorine dioxide is an exceptionally reactive gas, which is not stored due to its instability ... more in the glossary, chlorine, gravity filtration, nanofiltration Nanofiltration is based on the same principle as reverse osmosis Reverse osmosis is a sub-sector within membrane filtration. It is the process with the highest ... more in the glossary. The difference: The separation ... more in the glossary, desalination, silver-ion sterilisation, ultraviolet disinfection and ozonisation) also guarantee absolute disinfection safety.

Downloads

Suitable products - Potable Water Treatment

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump beta. Cost-effective, overload-proof and adaptable to existing signal transducers.

more

The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eX cellent ingenuity! With integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X is ideal for all metering work involving liquid media.

more

The gamma/ XL is a smart, connectible solenoid-driven metering pump that is setting new standards in terms of productivity, reliability and cost-effectiveness.

more

The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.

more

Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.

more

The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

more

The metering and emptying station DULCODOS SAFE-IBC provides your process with chemicals interruption-free. It conforms to the modified legislature for liquids harmful to water in accordance with the German Ordinance for Systems Handling Substances Harmful to Water AwSV.

more

Turbidity measurements with DULCOTEST DULCO turb C: Compact measuring instrument that uses light scatter to measure turbidity, with a large measuring range and different designs to comply with ISO and EPA standards. Available with or without automatic cleaning.

more

The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, wastewater treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.

more

As a controller in water analysis, the DULCOMETER Compact is the correct controller for control tasks that require only a 1-way control.

more

Ultrafiltration system DULCOCLEAN UF reliably and safely uses membrane technology to remove turbidity, particles and microbiological contamination.

more

Reverse osmosis system DULCOSMOSE BW is the standard model for the modern desalination of brackish water. Equipped with the latest generation of 'high rejection low-pressure' membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

The reverse osmosis system DULCOSMOSE SW is the standard model for modern desalination of salt water. Equipped with the latest generation of 'high rejection low-pressure' membranes, this system achieves maximum permeate output with moderate operating pressures, thereby lowering investment and operating costs.

more

Photometers measure nearly all disinfectants and the pH value based on the photometric principle. They are portable, compact and make safe, simple measurement possible.

more

Conductivity sensors for optimum process integration: DULCOTEST sensors meet a wide range of measuring requirements and allow the best solution to any given measuring task to be achieved.

more

Widely used sensor for the measurement of oxygen dissolved in water above 0.1 ppm to oxygen saturation. For installation in standard immersion pipes or in the bypass line of the process flow. Use in aeration tanks of clarification plants, waterworks, in fish breeding or to monitor surface water. Minimal maintenance due to visual measuring principle.

more

Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and wastewater, suitable for pH values up to 9.5.

more

The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.

more

pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real-time. Control, regulate and monitor chemical processes with the aid of precise measured values.

more

Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.

more

The unique UV systems DULCODES LP are synonymous with pioneering water treatment – efficient and free of chemicals.

more

UV system DULCODES LP for drinking water disinfection, comprehensively certified to internationally-recognised DVGW/ÖVGW/SVGW/UVDGM standards. Looking to the future, the systems have already been type-tested in accordance with the latest DIN 19294-1:2020-08 test regulation. Successful certification officially confirms the precise 50-100% control range of the highly efficient VARIO-Flux lamps with dynamic lamp heating.

more

CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from salt and electricity. Key advantages are its simple process management and excellent system safety through integrated ventilation and bleeding.

more

As a nanofiltration system, the DULCOSMOSE NF, a compact and value-for-money unit, can handle partial desalination in industrial applications. Maximum permeate output at low operating pressures ensures low operating costs thanks to the "ultra low pressure" diaphragm.

more

Continuous on-line measurement of ammonia using pH appropriate sensor technology. Uses specific sensor adapted to operational pH range to ensure correct measurement. Determine free ammonia, total ammonia, and NH3-N for control and reporting purposes.

more

Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

more

DULCOMETER diaLog X ensures that your water treatment processes run as efficiently as possible. The controller is highly flexible and suited to systems with many measured and control parameters. Using standard data communications platforms, these parameters can be easily monitored and evaluated remotely.

more

ProMinent Custom System Solutions provide a complete turnkey package to accompany small solenoid-driven metering pumps for light industry and municipal chemical applications.

more

ProMinent Custom System Solutions provide a complete turnkey package to accompany motor-driven metering pumps for municipal chemical applications

more

The DulcoBlend I provides a solution for activating and blending emulsion polymers when the pressure piping codes need to be accomodated. The unit is CRN approved for applications in Canada.

more

The 4…20 mA transmitters for pH, ORP, fluoride, temperature and PEROX sensors enable safe and fault-free transmission of the sensor signal to the controller. Thanks to simple installation directly on the sensor, a stable signal transmission over larger distances can be ensured too.

more

Hydrogen peroxide measurement with DULCOTEST sensors: Efficient and reliable determination of the concentration of hydrogen peroxide - can be used in a wide range of applications.

more

DULCOFLEX DFXa meters outgassing, viscous, abrasive or shear-sensitive media and is setting new standards in metering. Linear and reproducible metering (± 1 %) is guaranteed with this peristaltic pump under all process conditions. Hose replacement is a very simple process.

more

ProMinent is your sole source provider for complete chemical metering systems.

more

ProMinent is your sole source provider for complete chemical metering systems.

more

Complete wall mounted assembly for easy installation and simple measurement of common water treatment parameters

more

ProMinent solutions that incorporate enclosure, pump system and tank along with containment and environmental controls in one simple, easy to install package

more

The ProSIP MF Metering Pump Packages are designed to accommodate main or main/standard motor driven metering pumps. That way, it offers a floor mount solution for pumps like the Sigma Series, our ProMus, Meta and Plasma Pumps.

more

The ProSIP SF & SW Metering Pump Packages are designed to accommodate main or main/standard solenoid driven metering pumps. That way, it offers a floor or wall mount solution for pumps like the gamma/ X, delta, beta and Concept Series Pumps.

more

ProSip-S is tried and tested package designed to accompany smaller solenoid-driven metering pumps for light duty and municipal chemical applications.

more

The modular bypass armature BAMa accommodates ProMinent sensors for water treatment. The armature is simply installed in a bypass of the main process line. It is available in various variants, each perfectly designed for special water treatment applications – from drinking water, water for pool & wellness to industrial water.

more

Contact us

ProMinent Fluid Controls Ltd.


»We are always available to help. Don't hesitate to contact us.«

+1 888 709 9933 

References - Potable Water Treatment

News and Events

ProMinent Newsletter - receive latest news, customized for you! subscribe now